Shop For Tools Here!

-The new SENCO all battery-powered Cordless Finish 41 allows you to quickly attack a variety of Finish and Trim projects. Now available with a switchable drive control for use in sequential or contact actuation mode. Since compressor set-up is not required all SENCO Cordless Tools are perfect for punch list jobs. Capable of driving up to four nails per second and 600 nails per battery charge there is plenty of power and speed to keep pace with your work. Nicely balanced and easy to use, the Cordless Finish 41 drives 15 gauge nails from 1" to 2?". All this is backed by a new durable drive system, adjustable depth-of-drive control, EZ-Clear?, and a no-mar pad for perfect finishing.

Using this tool in altitudes higher than 5,000 feet or temperatures below 19 F is not recommended. The 219247 High-Altitude Blue Metering Valve does not work with this tool's red fuel cell and should not be used.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM325CT is a great example of this innovation. This light nailer packs a hefty punch for only weighing 7.4 pounds. It's able to drive 2" to 3-1/4" fasteners with ease into the hardest of woods. Tight spots and corners are no problem for the angled design of the Paslode IM325CT. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers: Paslode products cannot be shipped outside of the USA.

The DeWalt DC612KA Factory Reconditioned Cordless Finish Nailer powered by DeWalt XRP battery system cycles fast and drives nails in fully without leaving a surface blemish. The XRP batteries are designed to perform 40% more than standard batteries, and provide extended run-time and also ensure a long work life. DeWalt offers the finish nailer in both straight and 20 angled magazine configurations, which accept most brands of 16 gauge straight nails and ensures consistent nail penetration into both soft and hard joints. Portable and versatile, the DeWalt DC612KA is ideal for nailing, installing molding, chair rails, cabinetry and other fine finish applications. The finish Nailers top cap is impact resistant and is easily removable for troubleshooting.. The headlights help while working in dimly lit conditions. The numbered, 6-position dial helps in easy referencing of depth levels. The DeWalt DC612KA Finish Nailers nosepiece is designed to for the removal of jammed nailers, without the need to use tools.

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tool's yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. It's able to drive 3/4" to 2-1/2" fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers: Paslode products cannot be shipped outside of the USA.

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tool's yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250A Factory Reconditioned Finish Nailer is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.9 pounds. It's able to drive 1-1/4" to 2-1/2" fasteners with ease. Tight spots and corners are no problem for the slim, angled design of the Paslode IM250A. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better?Attention International Customers: Paslode products cannot be shipped outside of the USA.

Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints.Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Straight magazine, accepts 18 gauge nails ranging in legths from 5/8" to 2"Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches.Part of the XRP DEWALT Cordless systemContact Trip Lock-Off disables the trigger when not in use and is easy to engage/dis-engageIntegrated LED lights for long life and durabilityTop cap is impact resistant and easy to remove for troubleshootingProvides increased portability and versatility on the Job-site.Increased visibility and durability along with protection for work-surface from the contact-trip.12 position dial allows the user to move between applications without having to re-acquire exact depth settingFully enclosed, box style magazine, keep dust and debris out of the magazine preventing the tool from malfunctioning

The Paslode OT2250 staples work with the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving and the galvanized finish resists corrosion, making them suitable for exterior applications. Attention International Customers: Paslode products cannot be shipped outside of the USA.

The Paslode OT2695 staples work with the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving and the galvanized finish resists corrosion, making them suitable for exterior applications. Attention International Customers: Paslode products cannot be shipped outside of the USA.

Front activation pin on the magazine helps prevent accidental staple firingShoots up to 9/16" staples to handle a wide variety of fastening applicationsEasy-to-load magazine accommodates up to 84 staplesDepth-adjustment knob helps you set the depth of the stapleOvermold grip for increased user comfort

The Paslode 404705 is a replacement No-Mar Contact Element Tip for the Paslode Cordless Framing Nailers. It can be used with Paslode 900420 IM325CT Cordless Angled Framing Nailers with black or silver tips. Newer Paslode 900420's will not have a black or silver tip; they will have an orange tip and should not be used with the Paslode 404705 No-Mar Contact Element Tip. Proper use of the 404705 No-Mar Contact Element Tip will allow you to accurately place your fasteners while preventing damage to your materials. Attention International Customers: Paslode products cannot be shipped outside of the USA.

The Paslode 650039 is a 4-pack of fuel cells for the Paslode Cordless Brad and Finish Nailers. They are to be used to supply power for the Paslode 901000 IM200-F18 TrimMaster 18-Gauge Cordless Straight Brad Nailer, Paslode 900600 IM250A 16-Gauge Cordless Angled Finish Nailer, and the Paslode 902000 IM250II 16-Gauge Cordless Straight Finish Nailer. The Paslode 650039 comes with 4 fuel cells, each of which capable of driving up to 1,200 fasteners. That means you can drive up to 4,800 nails with this four-pack! Attention International Customers: Paslode products cannot be shipped outside of the USA.

The Paslode 219305 Cordless Trim Tune-Up Kit is great to have around in case simple maintenance has to be done on your Paslode Cordless Framing Tools. The Paslode 219305 Tune-Up Kit has all of the components and key parts needed to tune up the Paslode 900420 IM325CT Cordless Angled Framing Nailer. Included in the kit are a degreaser cleaner, lubricant, air filter, spark plug, fuel stem adapter, o-ring, and instruction manual. Attention International Customers: Paslode products cannot be shipped outside of the USA.